Abstract:
Приведены результаты моделирования сферической роликовой передачи с двухрядным сателлитом
в модуле Pre\Post системы NX. Рассмотрена упрощенная трехэлементная модель передачи, включающая
ведомый кулачок, ролик и сателлит. В модели предполагается передача нагрузки одним роликом из внутреннего ряда тел качения. Определены контактные давления на поверхностях ролика и ведомого кулачка,
напряжения среза и смятия, действующие на ролик. Приведены характеристики разработанной конечно-
элементной модели и ее ограничения. Результаты компьютерного анализа сопоставлены с теоретическими
расчетами. Установлено, что основным критерием прочностной надежности исследуемой передачи является контактная прочность ведомого кулачка. The results of modeling a spherical roller transmission with a two-row pinion in the Pre\Post module of the
NX system are presented. A simplified three-element transmission model is considered, including a driven cam, a
roller, and a pinion. The model assumes the transfer of the load by one roller from the inner row of rolling elements.
The contact pressures on the surfaces of the roller and the driven cam, as well as the shear and crumple stresses acting
on the roller are determined. The characteristics of the developed finite element model and its limitations are given.
The results of the computer analysis are compared with the theoretical calculations. It is established that the main
criterion for the strength reliability of the transmission under study is the contact strength of the driven cam.